工业物联网无线信道与噪声特性

张克; 刘留; 袁泽; 张琨; 张建华; 刘志军

doi:10.11959/j.issn.1000−0801.2018217

您当前的位置：

首页 >

文章列表页 >

工业物联网无线信道与噪声特性

研究与开发 | 更新时间：2024-06-05

- 工业物联网无线信道与噪声特性
- Wireless channel and noise characteristics in industrial internet of things
- 电信科学 2018年34卷第8期页码：87-97
- 作者机构：
  
  1. 北京交通大学电子信息工程学院，北京100044
  2. 北京邮电大学泛网无线通信教育部重点实验室，北京100876
  3. 北京航天测控技术有限公司，北京100041
- 作者简介：
  
  [ "张克（1994−），女，北京交通大学硕士生，主要研究方向为宽带无线通信。" ]
  [ "刘留（1981−），男，博士，北京交通大学电子信息工程学院教授、博士生导师，主要研究方向为高铁无线信道测量与建模、高铁宽带接入物理层关键技术等。" ]
  [ "袁泽（1994−），男，北京交通大学硕士生，主要研究方向为宽带无线通信。" ]
  [ "张琨（1993−），男，北京交通大学硕士生，主要研究方向为宽带无线通信。" ]
  [ "张建华（1976−），女，北京邮电大学信息与通信工程学院教授、博士生导师，主要方向为宽带移动通信系统新理论及技术等。" ]
  [ "张志军（1986−），男，北京航天测控技术有限公司高级工程师，主要研究方向为测控技术、装备自动化测试等。" ]
- 基金信息：
  
  北京邮电大学泛网无线通信教育部重点实验室资助项目;Key Laboratory of Universal Wireless Communications,Ministry of Education(KFKT-2018105);北京市科技新星计划基金资助项目;Beijing New-star Plan of Science and Technology(Z161100004916068);国家自然科学基金面上基金资助项目;The National Natural Science Foundation of China(61471027)
- DOI：10.11959/j.issn.1000−0801.2018217
  中图分类号： TN929.5
- 网络出版日期：2018-08，
  
  纸质出版日期：2018-08-20
- 稿件说明：
移动端阅览
张克, 刘留, 袁泽, 等. 工业物联网无线信道与噪声特性[J]. 电信科学, 2018,34(8):87-97.

Ke ZHANG, Liu LIU, Ze YUAN, et al. Wireless channel and noise characteristics in industrial internet of things[J]. Telecommunications science, 2018, 34(8): 87-97.
张克, 刘留, 袁泽, 等. 工业物联网无线信道与噪声特性[J]. 电信科学, 2018,34(8):87-97. DOI： 10.11959/j.issn.1000−0801.2018217.

Ke ZHANG, Liu LIU, Ze YUAN, et al. Wireless channel and noise characteristics in industrial internet of things[J]. Telecommunications science, 2018, 34(8): 87-97. DOI： 10.11959/j.issn.1000−0801.2018217.

摘要

随着“中国制造2025”“智能制造”“互联网+”等一系列国家战略规划的提出和实施，国内工业物联网技术将迎来迅猛的发展。然而，工厂恶劣环境下的信道和噪声特性给工业物联网无线通信带来了极大的挑战。基于此，对工业物联网应用的无线通信技术进行介绍和对比，总结了工业物联网环境下的信道和噪声特点，对工业物联网无线通信研究中的关键内容——信道和噪声特性分析进行了回顾。

Abstract

With the proposal and implementation of “Made in China 2025” “IntelligentManufacturing” “Internet plus” and a series of national strategic planning

the industrial internet of things(IIoT)has developed rapidly in China.However

the channel and noise characteristics of the industrial poor environment have brought great challenges to the wireless communication of the industrial internet of things.The application of different wireless communication technologies in IIoT were introduced and compared and the features of wireless channel and noise in the environment of IIoT were summarized.As the key content of wireless communication research

channel and noise characteristics were analyzed overall.

关键词

Keywords

references

杜玉河 . 《工业物联网白皮书》正式发布 [J ] . 起重运输机械 , 2017 ( 10 ): 34 - 35 .

DU Y H . The industrial internet of things white paper was officially released [J ] . Lifting and TransportMachinery , 2017 ( 10 ): 34 - 35 .

工业和信息化部 . 物联网的十三五规划(2016-2020)年 [R ] . 2016 .

Ministry of Industry and Information Technology . IoT 13th five-year plan(2016-2020)years [R ] . 2016 .

陈山枝 . 发展5G 的分析与建议 [J ] . 电信科学 , 2016 , 32 ( 7 ): 1 - 10 .

CHEN S Z . Analysis and suggestion of future 5G directions [J ] . Telecommunications Science , 2016 , 32 ( 7 ): 1 - 10 .

宫诗寻 , 陶小峰 . 5G大规模机器类通信中的传输技术 [J ] . 中兴通讯技术 , 2017 , 23 ( 3 ): 20 - 23 .

GONG S X , TAO X F . Transmission technologies inmassivemachine type communication for 5G [J ] . ZTE Technology Journal , 2017 , 23 ( 3 ): 20 - 23 .

刘留 , 陶成 , 余立 , 等 . 高速铁路无线信道测量与信道模型探讨 [J ] . 电信科学 , 2011 , 27 ( 5 ): 54 - 60 .

LIU L , TAO C , YU L , et al . Discussion on the channelmeasurement and channelmodel under high speed railway environment [J ] . Telecommunications Science , 2011 , 27 ( 5 ): 54 - 60 .

赖春媛 , 闫文卿 , 亓晋 . 基于云雾融合的工业物联网能源管理架构 [J ] . 电信科学 , 2017 , 33 ( 10 ): 2 - 9 .

LAI C Y , YAN W Q , QI J . An energymanagement framework based on fog-cloud combining for industrial internet of things [J ] . Telecommunications Science , 2017 , 33 ( 10 ): 2 - 9 .

常洁 , 王艺 , 李洁 , 等 . 工业通信网络现有架构的梳理总结和未来运营商的发展策略 [J ] . 电信科学 , 2017 , 33 ( 11 ): 123 - 133 .

CHANG J , WANG Y , LI J , et al . Summary of existing framework in industrial communication networks and future development strategies for communication operators [J ] . Telecommunications Science , 2017 , 33 ( 11 ): 123 - 133 .

SKYLAB . 物联网时代的黑马——NB-IoT [R ] . 2017 .

SKYLAB . The black horse in the age of the internet of things——NB-IoT [R ] . 2017 .

邢宇龙 , 张力方 , 胡云 . 移动蜂窝物联网演进方案研究 [J ] . 邮电设计技术 , 2016 ( 11 ): 87 - 92 .

XING Y L , ZHANG L F , HU Y . The evolution research ofmobile cellular communication technology for IoT [J ] . Designing Techniques of Posts and Telecommunications , 2016 ( 11 ): 87 - 92 .

严小强 , 李星 . 基于LoRa功耗及其响应速度设计研究 [J ] . 电子质量 , 2017 ( 9 ): 9 - 12 .

YAN X Q , LI X . Research on power consumption and response speed design based on LoRa [J ] . Electronics Quality , 2017 ( 9 ): 9 - 12 .

韩磊 . 移动用户终端的电磁辐射发射测试软件开发 [D ] . 北京:北京交通大学 , 2011 .

HAN L . The development of electromagnetic radiation emission test software formobile useRterminal [D ] . Beijing:Beijing Jiaotong University , 2011 .

CHEFFENA M . Propagation channel characteristics of industrial wireless sensor networks[wireless corner] [J ] . IEEE Antennas ＆PropagationMagazine , 2016 , 58 ( 1 ): 66 - 73 .

RAPPAPORT T S . Characterization of UHFmultipath radio channels in factory buildings [J ] . IEEE Transactions on Antennas ＆ Propagation , 1989 , 37 ( 8 ): 1058 - 1069 .

KAREDAL J , WYNE S , ALMERS P , et al . Statisti cal analysis of the UWB channel in an industrial environment [C ] // VehiculaRtechnology Conference(VTC2004-Fall),Sept 26-29,2004,Los Angeles,CA,USA . Piscataway:IEEE Press , 2004 : 81 - 85 .

MIAOUDAKIS A , LEKKAS A , KALIVAS G , et al . Radio channel characterization in industrial environments and spread spectrummodem performance [C ] // 2005 IEEE Conference on Emerging Technologies and Factory Automation(ETFA 2005),Sept 19-22,2005,Catania,Italy . Piscataway:IEEE Press , 2005 :93.

KAREDAL J , WYNE S , ALMERS P , et al . Ameasurement-based statisti calmodel for industrial ultra-wideband channels [J ] . IEEE Transactions on Wireless Communications , 2007 , 6 ( 8 ): 3028 - 3037 .

KOZLOWSKI S , SZUMNY R , KUREK K , et al . Statisti calmodelling of a wideband propagation channel in the factory environment [C ] // 2009 European Conference on Wireless Technology,Sept 28-29,2009,Rome,Italy . Piscataway:IEEE Press , 2009 : 190 - 193 .

WANG Y , LU W , ZHU H . Experimental study on indoor channelmodel for wireless sensor networks and Internet of Things [C ] // 2010 IEEE International Conference on Communication Technology,Nov 11-14,2010,Nanjing,China . Piscataway:IEEE Press , 2010 : 624 - 627 .

FERRER-COLL J , AሷNGSKOG P , CHILO J , et al . Characterisation of highly absorbent and highly reflective radio wave propagation environments in industrial applications [J ] . Communications IET , 2012 , 6 ( 15 ): 2404 - 2412 .

AI Y , CHEFFENA M , LI Q . Power delay profile analysis andmodeling of industrial indoor channels [C ] // 2015 European Conference on Antennas and Propagation,April 13-17,2015,Lisbon,Portugal.[S.l.:s.n . ] , 2015 : 1 - 5 .

HOLFELD B , WIERUCH D , RASCHKOWSKI L , et al . 85 GHz for wireless M2M communication of industrial robots [C ] // 2016 IEEE WCNC,May 23-27,2016,Kuala Lumpur,Malaysia . Piscataway:IEEE Press , 2016 .

CROONENBROECK R , UNDERBERG L , WULF A , et al . Measurements foRthe development of an enhancedmodel for wireless channels in industrial environments [C ] // IEEE International Conference on Wireless and Mobile Computing,Networking and Communications,Oct 9-11,2017,Rome,Italy . Piscataway:IEEE Press , 2017 : 1 - 8 .

TANGHE E , JOSEPH W , VERLOOCK L , et al . The industrial indoor channel:large-s cale and temporal fading at 900,2400,and 5200 MHz [J ] . IEEE Transactions on Wireless Communications , 2008 , 7 ( 7 ): 2740 - 2751 .

TANGHE E , JOSEPH W , MARTENS L , et al . Large-s cale fading in industrial environments at wireless communication frequencies [C ] // 2007 Antennas and Propagation Society International Symposium,June 10-15,2007,Honolulu,Hawaii,USA . Piscataway:IEEE Press , 2007 : 3001 - 3004 .

ŞEYMA TÜTÜNCÜ , KARA A . UHF propagationmeasurements in heavy industry [C ] // 2016 Signal Processing and Communication Application Conference,May 16-19,2016,Zonguldak,Turkey . Piscataway:IEEE Press , 2016 .

LUO S , POLU N , CHEN Z , et al . RF channelmodeling of a WSN testbed for industrial environment [C ] // 2011 Radio ＆Wireless Symposium,Jan 1,2011,Phoenix,USA . Piscataway:IEEE Press , 2011 : 375 - 378 .

WITTMANN M , MARTI J , KURNER t . Impact of the power delay profile shape on the bit error rate inmobile radio systems [J ] . IEEE Transactions on VehiculaRtechnology , 2002 , 46 ( 2 ): 329 - 339 .

KHAN H N , GROSINGER J , GÖRTSCHACHER L , et al . Statisti cal analysis of the power delay profile of a SIMO UHF backscatter RFID channel in an engine test bed [C ] // 2017 Antennas ＆ Propagation Conference,June 9-14,2017,San Diego,CA,USA . Piscataway:IEEE Press , 2017 : 1 - 5 .

AI Y , CHEFFENA M , LI Q . Radio frequencymeasurements and capacity analysis for industrial indoor environments [C ] // 2015 European Conference on Antennas and Propagation,Apr 12-17,2015,Lisbon,Portugal . Piscataway:IEEE Press , 2015 .

KAREDAL J , WYNE S , ALMERS P , et al . UWB channelmeasurements in an industrial environment [C ] // 2004 Global Telecommunications Conference(GLOBECOM’04),November 29-December 3,2004,Dallas,Texas,USA . Piscataway:IEEE Press , 2004 : 3511 - 3516 .

CHEFFENA M . Industrial wireless sensor networks:channelmodeling and performance evaluation [J ] . EURASIP Journal on Wireless Communications ＆ Networking , 2012 ( 1 ): 1 - 8 .

SHAN Q , BHATTI S , GLOVER I A , et al . Characteristics of impulsive noise in electricity substations [C ] // 2009 Signal Processing Conference,Aug 24-28,2009,Glasgow,Scotland,UK . Piscataway:IEEE Press , 2009 : 2136 - 2140 .

杨飞 , 阚润田 , 沙斐 . 无线电骚扰的统计测量方法研究 [J ] . 电子测量与仪器学报 , 2009 , 23 ( 1 ): 22 - 26 .

YANG F , KAN Rt , SHA F . Research on statisti calmeasurement of radio noise and electromagnetic disturbance [J ] . Journal of Electronic Measurement and Instrument , 2009 , 23 ( 1 ): 22 - 26 .

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于工业物联网的工业数据采集技术研究与应用